How-to guides Biometric devices

Connect a Hikvision device

Send every verified scan from a Hikvision face or fingerprint terminal to Aajar.

By Aajar team · · 2 min read

Hikvision access-control and face terminals (for example the DS-K1T series) can post every event to a web address. Aajar gives each device a secret address and records the verified scans as attendance.

Before you start

  • The terminal is on your network and you can open its web page in a browser (its IP address, signed in as admin).
  • The people are enrolled on the terminal with an Employee No. That number is what Aajar matches.

Step 1: register the device in Aajar

  1. Open Biometric Devices, choose Hikvision as the brand and give the device a name. The label is optional.
  2. Press Register device, then Setup on its row. It shows the address, the secret path, the port and the protocol to type into the terminal.

Step 2: set the terminal

  1. Open the terminal's web page and go to Configuration → Network → Advanced Settings → HTTP Listening. On some firmware this is called Event Receiver or Event Notification.
  2. Add a listening host. Type the address, the URL (path), the port 80 and the protocol HTTP exactly as shown in Setup.
  3. Save. Many terminals have a test button; use it if yours does.

Step 3: biometric IDs and a test

  1. In Employee biometric IDs type each person's Employee No. from the terminal.
  2. Scan a face or fingerprint. The scan appears under Punch log within seconds.

What is recorded

Only verified scans with an employee number become attendance. Failed attempts and the terminal's regular heartbeat messages are ignored.

If nothing shows up

  • Open Setup and look at Messages received. If messages arrive but no punch is recorded, the text of the message shows what the terminal sent, which tells us what to adjust.
  • If no message arrives, check the address, path and port on the terminal, and that the terminal can reach the internet.
  • If the secret path was shared by mistake, press New link and type the new path on the terminal.

Newer firmware also allows HTTPS on port 443. Plain HTTP on port 80 works on all of them. If your terminal has no HTTP Listening option, export the event list from iVMS-4200 and use Import a device's log.