How-to guides Biometric devices

Connect a CP Plus device

Push attendance from a CP Plus terminal, or import its log.

By Aajar team · · 4 min read

This guide connects a CP Plus terminal to Aajar so every scan becomes attendance by itself. CP Plus models differ a lot. If yours has a Cloud Server or ADMS menu it pushes by itself; if not, use the import. The menu names below are the usual ones; they differ a little between models and firmware versions.

Before you start

  • The terminal must have an internet connection (WiFi, a LAN cable to your router, or a SIM).
  • Have the terminal's serial number ready. It is printed on the label at the back, and shown in the device menu under Device Info.
  • You need to be an Owner or Admin of your organization.

Step 1: register the device in Aajar

  1. Open Biometric Devices in the left menu (under Attendance & Leave).
  2. Under Register a device choose CP Plus as the brand, type the serial number and a name such as "Main entrance". If you have more than one device, also fill in Location and what a scan means (Entry only, Exit only, or In & Out). Press Register device.
  3. Press Setup on the new row. It shows the exact server address, port and Comm Key for this device. Keep this open for the next step.

Step 2: point the terminal at Aajar

  1. On the terminal open Menu → Communication → Cloud Server (ADMS), if your model has it.
  2. Switch the setting on, and type the server address and port exactly as shown in Setup. Type the address without https:// or a slash.
  3. If the terminal asks for a Comm Key or password, type the Comm Key from Setup. If it has no such field, leave it empty.
  4. Check the terminal's date and time are right, then save and, if asked, restart the terminal.

Within a minute or two the device row in Aajar changes to Online just now. If it does not, see the checks at the end.

Step 3: tell Aajar who is who

A terminal knows people only by the number they were enrolled with (their ID or PIN on the terminal). Aajar needs the same number on each employee.

  1. On the same Biometric Devices screen, find Employee biometric IDs.
  2. Type each person's terminal number in their row and press Save. For many people at once use Bulk upload biometric IDs.
  3. A scan from a number nobody has yet is not lost. It waits under Punch log as unmatched and is applied the moment you save that number on someone. See "How employees are matched to a biometric device" for worked examples.

Step 4: test it

  1. Scan a finger or face on the terminal.
  2. Within a minute the scan appears under Punch log with the device, its location and IN or OUT. The person's attendance for the day shows the first scan as clock-in and the last scan as clock-out (or, if you turn on Count only the time spent inside, every visit; see the guide on several gates).

If nothing shows up

  • The terminal is offline: check its WiFi or network cable and try opening any website from the same network.
  • Wrong address or port: re-type them from Setup. If port 443 does not work on your model, try port 80 (Aajar accepts both).
  • Wrong date or time on the terminal: fix it in the terminal's date and time menu, then scan again.
  • The Comm Key does not match: use New key in Setup and type the new one on the terminal.
  • Your model has no Cloud Server / ADMS setting at all: use the import instead (see "Import attendance from a device log").

Another way: import the log

If the terminal cannot reach the internet, export its log from the CP Plus attendance software: download the device log, then open Reports, choose the punch report and export it to Excel or CSV. Then upload the file under Import a device's log in Biometric Devices.